FMA IAe 33 Pulqui II

IAe 33 Pulqui II
Pulqui II (No. 02) c. 1950
Role	Fighter/Interceptor
Manufacturer	Fábrica Militar de Aviones (FMA)
Designed by	Kurt Tank
First flight	27 June 1950[1]
Retired	1960
Primary user	Fuerza Aérea Argentina
Number built	5 (1-static test, 4 flying prototypes)
Developed from	Focke-Wulf Ta 183

The FMA IAe 33 Pulqui II (in the indigenous language Mapuche, Pulqúi: Arrow)^[2] was a jet fighter aircraft designed by Kurt Tank in the late 1940s in Argentina, under the Perón government, and built by the Fábrica Militar de Aviones (FMA).^[3] Embodying many of the design elements of the wartime Focke-Wulf Ta 183, an unrealized fighter project,^[4] the FMA envisioned the IAe 33 Pulqui II as a successor to the postwar Gloster Meteor F4 in service with the Fuerza Aérea Argentina. The Pulqui II's development was comparatively problematic and lengthy, with two of the four prototypes being lost in fatal crashes. Despite one of the prototypes being successfully tested in combat during the Revolución Libertadora, the political, economic and technical challenges faced by the project meant that the IAe 33 was unable to reach its full potential, and the Argentine government ultimately chose to purchase F-86 Sabres from the United States in lieu of continuing development of the indigenous fighter to production status.^[5]

A wind tunnel model of the Ta 183 Huckebein (German: Hunchback)^[6]

The I.Ae. 27 Pulqui I prototype in 1951

Contents 1 Background 1.1 Kurt Tank 2 Design and development 2.1 Testing and evaluation 3 Political ramifications 4 Operational history 5 Cancellation 6 Legacy 7 Survivors 8 Specifications (3rd and 4th prototypes)

Background

In the late 1940s, Argentina benefited from the recruitment of prominent German aerospace scientists and engineers, fleeing Europe following the defeat of the Nazis and seeking sanctuary in Latin America. The first group of these refugees had also included French designer Émile Dewoitine, castigated as a collaborator in his homeland,^[7] who headed up the IAe 27 Pulqui I experimental fighter program with Argentine engineers Juan Ignacio San Martín, Enrique Cardeilhac and Norberto L. Morchio.^[8] The Pulqui I was the first jet aircraft designed and built in Latin America.^[7] In 1947, flight tests revealed a mediocre performance resulting in the cancellation of the IAe 27 program.^[9] The Aerotechnical Institute (Spanish: Instituto Aerotécnico), under the leadership of Morchio, persevered with its efforts to build a successful indigenous jet fighter and, at first, attempted to modify the earlier aircraft. When it became apparent that the Pulqui I had little potential for further development, the Aerotechnical Institute initiated a new design utilizing the more powerful (20.31 kN (4,570 lb_f)) Rolls-Royce Nene II turbojet engine. In early 1948, the Institute completed a scale model of what it called the IAe-27a Pulqui II. This design featured trapezoidal wings, swept back at an angle of 33°, and used a NACA 16009 laminar flow airfoil section. A revised model was built later that year with the wings relocated to a shoulder-mounted position and the tailplane changed to a T-tail configuration.^[10]

L–R: Fighter aces Major Günther Specht and Hauptmann Gerhard Sommer with Prof. Kurt Tank, examining victory scores on Specht's Fw 190, July 1944.

Kurt Tank

Like Dewoitine, German designer Kurt Tank, the former technical director of the Focke-Wulf Flugzeugbau AG, had been similarly hired in 1947 to work on a jet fighter project for Argentina.^[11] Tank, along with 62 of his compatriots at Focke-Wulf,^[12] had emigrated to Latin America to restart his career in aerospace ventures.^{[13][N 1]} Surreptitiously entering the country with a passport identifying him as Pedro Matthies, he found a warm welcome and did not maintain the subterfuge of a secret identity.^[7] Along with his former employees, he was instrumental in the evolution of the Instituto Aerotécnico into Argentina's military aircraft factory, the Fábrica Militar de Aviones at Córdoba.^[14] Tank was both an engineer as well as a test pilot, who had designed the Fw 190 fighter, but his design team had also been responsible for the Focke-Wulf Ta 183,^[15] an unbuilt project that had been declared the winner of the 1945 Emergency Fighter Competition.^[16] The diminutive, swept-wing, jet-powered Ta 183, designed by Focke-Wulf engineer/designer Hans Multhopp, had only reached the stage of wind tunnel studies before the end of hostilities.^{[17][N 2]}

Pulqui II glider

Design and development

After his appointment as project director for a new indigenous fighter program, Tank adapted the basic Ta 183 airframe for the Nene II engine, substantially resulting in a new design that only bore a passing resemblance to its forebear. The Nene was larger, heavier and more powerful than the Heinkel HeS 011 turbojet that had been planned for use in the Ta 183,^{[N 3]} and therefore required a new, redesigned fuselage with a larger cross-section primarily due to the Nene's centrifugal rather than the HeS 011's axial compressor design.
Due to the similarity of the IAe-27a and Tank's redesign of the Ta 183, Juan Ignacio San Martín, the director of the Institute merged the two parallel projects as the IAe 33 Pulqui II. The fuselage of Tank's design was further adapted to use the IAe-27a's undercarriage.^[20] The shoulder-mounted, negative-incidence wings were swept back 40°, an even greater sweep angle than those of the Ta 183,^[9] and given a small amount of anhedral. Comparable to the Ta 183's engine placement, the Nene engine was situated aft of the cockpit, near the center of gravity with engine maintenance and service facilitated through the removal of the tail section.^[21] The airframe featured a graceful, 50° swept-back T-shaped empennage and a pressurized^{[N 4]} cockpit topped by a clear bubble-type canopy, faired into the dorsal fuselage. Armor was provided around the cockpit and a bulletproof windscreen was incorporated.^[23] Fuel capacity was initially 1,250 l (275 Imp. gal.) internally and 800 l (176 Imp. gal.) in the wings.^[24] Armament was planned to include four 20 mm cannon, a pair mounted in a staggered, near-ventral position along each side of the fuselage slightly set back from the jet intake.^[25]

Pulqui II without tail section, revealing its Rolls-Royce Nene II turbojet

Pulqui II at first flight, 27 June 1950

Testing and evaluation

To prove the soundness of the IAe 33 design, two gliders built under contract by another expatriate, Reimar Horten, were constructed and used for aerodynamics testing in 1948–1949, including flights by Tank himself.^[9] These tests revealed significant problems with lateral stability, resulting in modifications to the tail to address this problem before construction began on two prototype airframes. Due to the lack of modern machinery, the all-metal fabrication relied heavily on hand crafting and turning out the prototypes was a labor-intensive procedure. President Perón envisioned that a benefit of setting up an aviation factory in Argentina would be to introduce production standards comparable to world-class manufacturing facilities. However, Tank realized that production tools and jigs were not feasible at this stage and relied instead on essentially hand-built examples.^[26] The first airframe (No. 01) reserved for static testing, was subsequently destroyed during the tests.^[1]
The first of the "flying" IAe 33 prototypes, (No. 02) built in 1950, ^{[N 5]}completed its maiden flight on 27 June of that year, with Captain Edmundo Weiss at the controls.^[1] On the second flight, ex-Focke-Wulf test pilot Otto Behrens encountered severe lateral stability problems at speeds over 700 km/h (435 mph) and returned to the airfield as a precaution. Landing at very high speed, the aircraft bounced with sufficient force to cause the right main undercarriage strut to fail. During repairs to the aircraft, in order to rectify the "tricky" landing characteristics, the front undercarriage strut was increased in length, which served to alter the angle of incidence of the aircraft, while the shock absorbers were adjusted to have a greater "throw". Although never considered docile, the modifications improved the takeoff, landing and low-speed characteristics of the IAe 33.^[5] More serious aerodynamic problems persisted, stemming from tip stall—when the wingtip stalled before the wingroot resulting in an unpredictable "rolling moment"— that led to a change in the wing leading edge near the wingroot, while the rudder was modified in an attempt to resolve the interminable lateral instability issues. In addition, the canopy was reinforced with two external frames and a small fairing was installed above the engine exhaust.^[27]

The second prototype (No. 02m) note extended oleo, c. 1951

Tank, himself a capable development test pilot,^[11] took over the test program to investigate the aircraft's stalling characteristics, although the requisite airframe changes took several months to complete, with the Pulqui II N. 02(m) for modified,^[22] not able to undertake its third proving flight until 23 October. During the ensuing high-altitude test, on two successive occasions, the IAe 33 stalled inadvertently, although Tank had sufficient height at 9,000 m for recovery. Adding ballast to the nose of the aircraft cured the problem.^[22] On 8 February 1951, Tank publicly demonstrated the IAe 33 before Perón at the Aeroparque Jorge Newbery in Buenos Aires.^[12] The audience also included government officials, legislators and the foreign diplomatic corps in the military attaches of the embassies, along with a large crowd of spectators. Both the IAe 27 Pulqui I and IAe 33 Pulqui II flew during the demonstration.^[28]

The second prototype (No. 02), c. 1951

With the successful completion of the proving test flights, the Argentine Air Force requested a pre-production order of 12 IAe 33 aircraft.^[28] In 1951, the air force established a team of service pilots to test fly the new aircraft in a series of acceptance flights. The first flight by Commander Soto on 31 May 1951 revealed severe vibrations around 1,000 kilometres per hour (621 mph). Tank declared the sole prototype unserviceable pending an investigation into the problem, although this stricture appears to have been overlooked and the prototype continued to fly.^[5] On the eve of its 28th flight, Captain Vedania Mannuwal, assigned to the test program, was advised not to stress the aircraft, as the source of the vibrations experienced during the previous flight in the morning had not been discovered. Determined to "better" his team leader's recent performance, however, he ignored the precautions and began practicing aerobatic maneuvers near Córdoba during his afternoon flight.^[22] Consequently, in a high g-force turn, a structural failure occurred with the wing separating from the fuselage. After struggling with the Martin-Baker Mk I ejection seat, Mannuwal ejected at low altitude while the aircraft was inverted. His parachute did not fully deploy, however, and he was killed.^[22] The defect in the Pulqui II was traced to faulty workmanship related to welding the joint pin that fastened the wing to the fuselage. Welding had been a dichotomy in the manufacturing process necessitated by the paucity of modern forging and pressing equipment in Argentina.^[29]

Photograph of Pulqui II that appeared in many publications ^[24]

Construction of a third prototype (No. 03) began immediately after this loss. The design team initiated a number of changes to rectify design flaws found in the first "flying" prototype, including a incorporating larger rudder to improve lateral stability, increasing the size of the exhaust fairing and adding a unique air brake that rotated out from the sides of the fuselage near the tail, along with further reinforcement of the canopy. More fuel was also carried internally to extend the range from 2,030 to 3,090 kilometres (1,260 to 1,920 mi). The new IAe 33 prototype completed its first flight on 23 September 1952, piloted by Capt. Jorge Doyle. Flight testing resumed although the aircraft was prepared for a demonstration before President Perón on 11 October 1952. Behrens, who was slated for the flight, had reservations about the flight characteristics of the Pulqui II at the extremes of its flight envelope, characterizing them as "...the worst I've ever experienced as a test pilot."^[7] Two days prior to the exhibition, while practicing his display routine, Behrens stalled the Pulqui II at low level and was killed in the resulting crash, which destroyed the prototype.^[30]

The third prototype (No. 03), c. 1953

In 1953, Tank constructed a fourth prototype (No. 04) and, in an attempt to resolve the design's deep stall problems at high angles of attack, added stall fences on each wing and four strakes on the rear fuselage. Other refinements included a pressurized cockpit, additional fuel capacity and it was also the first prototype to be fitted with the definitive four 20 mm Hispano-Suiza HS.404 cannon armament. Lt. Conan Doyle piloted the fourth IAe 33 on its maiden flight on 20 August 1953 and, along with Lt. Gonzalez and Lt. Balado, began armament testing in 1954.^[22]
While an "all-weather" IAe 33 version adding a radar was considered,^[24] the Argentine Air Force made tentative plans for the acquisition of 100 Pulqui II aircraft, with the production version to be a dedicated interceptor,^[5] featuring an uprated Nene engine fitted with an afterburner and giving it an anticipated maximum speed of Mach 0.98.^[21] A number of foreign buyers had equally expressed interest in the IAe 33 including the Netherlands in 1951 and Egypt in 1953 but the lack of a clear commitment to a production series hampered prospects for export sales, with both nations eventually settling on other readily available fighter aircraft.^{[31][N 6]}

President Perón and "Evita" during his second inaugural parade, June 1952.

Political ramifications

The IAe 33 Pulqui II project was inexorably linked to the machinations and fortunes of the Perónista regime.^[34] Although the Fábrica Militar de Aviones was charged with bringing aviation projects to completion, constant political interference contributed to the delays and disarray in aviation programs. Moreover, Tank's team was not primarily focused on the IAe 33, completing the design of the FMA IA 35 Huanquero multi-purpose aircraft (transport, trainer and reconnaissance roles), that eventually entered production at the Dirección Nacional de Fabricación e Investigación Aeronáutica (DINFIA) (Spanish: "National Directorate of Aeronautical Manufacturing and Research"). The most devastating political decision was to divert the entire manufacturing program "seemingly overnight" to automotive products and agricultural equipment, essentially closing the aviation divisions.^[34] The competing DINFIA projects such as automotive manufacture served to further drain resources in time, money and personnel from the Pulqui II project.^[22]

Pulqui II (No. 04), c. 1955

While Argentina's finances were extremely strained at this juncture following the economic crisis in 1953, the most serious setback to the project came in January 1955 when Tank's contract expired. He reputedly requested almost twice as much money to continue but President Perón instead canceled his contract outright.^[30] Despite four years of development and trials, the IAe 33 project was still encountering teething problems and its status remained unclear although no final decision had been made to abandon a project that had reached iconic stature in the Perónist era.^[2]

Operational history

In September 1955, the sole remaining Pulqui II prototype was pressed into action in the Revolución Libertadora, a coup d'état led by General Eduardo Lonardi against Perón.^[35] The exact details of its participation are unknown, but when rebel forces commanded by Lonardi captured Córdoba as their first conquest, together with the Meteor F 4s fighter-bombers stationed at the Córdoba Escuela De Aviación - SACE (Military Aviation School), the IAe 33 was enlisted in the struggle.^[36] After flying combat missions against Perónist stalwarts, it later appeared in a flyover during the victory parade at Córdoba celebrating the triumph of the coup over loyalist forces.^[36]

Pulqui II (No. 04) possibly in camouflage, c. 1955

When the military junta came to power, the IAe 33 project was thrown into disarray. The new government released many of the leading air force staff; similarly, most of Tank’s team was forced to leave Argentina with Tank himself going to India, where he worked for Hindustan Aeronautics Limited, and later developed the HF-24 Marut supersonic fighter.^[36]
In 1956, the air force, in an effort to gain political support, planned a record flight from Córdoba to Buenos Aires to demonstrate the combat potential of the IAe 33. The Pulqui II would fly 800 km, strafe an air force practice range in the Buenos Aires area, and then return to Córdoba using only internal fuel. The only oxygen equipment available for such a long flight was scrounged from a FMA Meteor under repairs. Lt. Balado successfully completed the flight (including the strafing demonstration) at an average cruise speed of around 900 km/h, but the oxygen system failed on the return leg.^[22] The semi-conscious pilot managed to perform an emergency landing at high speed, but the heavy landing and resulting stress broke the landing gear, with the Pulqui II overrunning the end of the runway, the aircraft being damaged beyond repair.^[37]

Pulqui IIe (No. 05) on a test flight, c. 1959

Cancellation

Shortly after Balado's record flight, the Argentine Air Force reviewed its decision to acquire 100 Pulqui IIs for its fighter force. The Fábrica Militar de Aviones considered that, based on the spares and wing and fuselage components at hand, 10 aircraft could be constructed relatively quickly, however the remainder of the order would take five years to complete. Up until this time, the attrition of the original 100 Meteor F 4s obtained in the late 1940s continued, with plans for an alternative replacement, initially centered on the acquisition of 36 Canadair F-86 Mk 6 Sabres, being rejected in 1956 when the Central Bank of Argentina was unable to provide the necessary foreign exchange.^[38]
When the Canadair Sabre was no longer a viable option, the Fábrica Militar de Aviones seriously considered having the Pulqui II enter series production.^[38] A new prototype was ordered in 1957, despite the United States having offered 100 combat-proven F-86 Sabre fighters that were available immediately. The fifth IAe 33 Pulqui II (No. 05) prototype, designated Pulqui IIe,^[9] was constructed in 1959 (visually identical to the fourth prototype although retaining the original frame-less, clear canopy) and entered flight testing after its first flight on 18 September 1959,^[5] with Lt. Roberto Starc flying.^[1] The continual evolution of the Pulqui II had resulted in the design team solving its inherent instability at high angles of attack,^[39] as well as increasing fuel capacity through the use of a wet wing, to provide sufficient range.^[9] However the fighter was now considered obsolescent,^[22] in addition to its being tainted politically by its association with Perón.^[40] Consequently, the Argentine Government decided to cancel the IAe 33 project at the zenith of its development, instead acquiring 28 F-86F-40 Sabres from the United States at a "bargain-basement price" under the Mutual Defense Assistance Act.^[22]
In 1960, after completing only 12 test fights in a new role as a transonic research platform, the last IAe 33 prototype was retired and placed into storage, bringing the Pulqui II project to a culmination.^[1] The remaining factory tooling and incomplete airframes were summarily destroyed soon after.^[31]

L–R: Tank (barely visible) exhibiting the IAe 33 to President Perón (center: in white uniform, other figures on right, unidentified) c. 1951 ^[41]

Legacy

Despite not having achieved production status, the IAe 33 Pulqui II is still considered a significant aviation achievement because it was the first swept-wing jet fighter entirely developed and built in Latin America and, along with the Pulqui I, allowed Argentina to lay claim to becoming only the eighth nation in the world to develop such technology on its own.^{[12][N 7]} What doomed the project from the outset was the machinations of a corrupt political system that used nationalist fervor while bankrupting the country. Perón's dreams of building Argentina into a Latin American powerhouse centered on the creation of "blatant and rich symbols of military power", such as the Pulqui II, are portrayed in a recent film documentary where the "absurd adventure of building a model of Pulqui stands for hundreds of other quixotic projects conceived in ...the 'workshop of underdevelopment': an intermediary zone between First World industrial production and artisanal creation, typical of underdeveloped countries."^[2]
One tangible long-term benefit that can be traced to the Pulqui II project was the creation of Argentina's fledgling aviation industry, now restructured as the Lockheed Martin Aircraft Argentina S.A..^[49]

Pulqui IIe (No. 05); photo taken by Andrés Martin, 2007.^[50]

Survivors

After decades in an outdoor display at the Aeroparque, Museo Nacional de Aeronautica in Buenos Aires,^[51] today, the final prototype, the sole surviving example of the IAe 33 Pulqui II project, is preserved at the Argentine Air Force’s Museo Nacional de Aeronáutica de Argentina at Air Base Morón and displayed,^[52] still in its original colors and markings, alongside the IAe 27 Pulqui I, both harbingers of "lost dreams."^[2]

Specifications (3rd and 4th prototypes)

Data from "Pioneers & Prototypes: Pulqui, Pulqui II and IA-37/48."^[27]

General characteristics

• Crew: 1
• Length: 11.68 m (38 ft 4 in)
• Wingspan: 10.6 m (34 ft 9 in)
• Height: 3.5 m (11 ft 6 in)
• Wing area: 25.1 m² (270 sq ft)
• Empty weight: 3,736 kg (8,236 lb)
• Gross weight: 6,875 kg (15,157 lb)
• Powerplant: 1 × Rolls-Royce Nene II turbojet, 22.69 kN (5,100 lbf) thrust

Performance

• Maximum speed: 1,080 km/h (670 mph; 580 kn)
• Cruising speed: 954 km/h (593 mph; 515 kn)
• Range: 3,090 km (1,920 mi; 1,668 nmi)
• Endurance: 2 hours, 50 minutes
• Service ceiling: 15,000 m (49,213 ft)
• Rate of climb: 25.5 m/s (5,020 ft/min)

Armament

• Guns: 4 × 20 mm (0.79 in) Hispano-Suiza HS.404 license-built Bofors Oerlikon cannon